Name: Liaoning Super Group Construction Group Co., Ltd.
Super group hardware accessories store：
Doors and windows, stretch bending and pressboard workshop：
Address: middle section of South outer ring of Dashiqiao
1. In daily use, try not to step on the doorframe, not to use the doorframe as a support push-pull doorframe.
2. It is recommended to use soft cloth dipped in water or neutral detergent to clean white steel doors and windows. Soap water, detergent powder and toilet cleanser should not be used.
3. It is recommended to wipe away the accumulated water on the surface and inside the doorframe as soon as possible after rain. The track is used for a long time, the friction increases, can be coated with a little oil or paraffin oil as a protective layer, but also easy to push and pull use.
4. check the joint of white steel door frame and wall frequently. If it is loose, it will make the frame whole deformation. Therefore, if the screw at the joint is loose, it should be fastened immediately. If the screw base is loose, epoxy glue should be used to mix a small amount of cement for sealing.
5. check the connection position of the frame regularly, tighten the bolts in time and replace the damaged parts.
6. The sealing edge and glass glue sealing edge are the key structures to ensure the sealing and insulation of doors and windows. If they fall off, they should be repaired and replaced in time.
Aluminum alloy push-pull door, flat door, door removal in daily use, gentle movement, push-pull process as it should be, encounter obstacles avoid violent push-pull, should find and solve the problem. Dust in the track and deformation of the doorframe are the main reasons for such failures. To keep the doorframe clean, it is recommended to use vacuum cleaner to remove the obstacles in the track.